There are many different ways to lay out concrete pavers and many different results you could achieve. Some bricks are very expensive and require many different materials. Pavers, on the other hand, are cost-effective and, when used correctly, have a very positive outcome. Customers should choose pavers over brick for their homes or businesses because they are usually cheaper and have a better end result. There are many different types of pavers and ways to use them. They require simple materials that all construction workers have. You will need to draw a diagram of where the pavers will be placed so you know what you are working with. When laying pavers it is necessary to follow a certain pattern. These can be used to make sidewalks, driveways, patios, or even streets (How to Install Pavers). There are many different types of pavers. The two basic categories of pavers are brick pavers and concrete pavers. Brick pavers are fired in kilns from clay, and concrete pavers are cast into forms. Brick pavers tend to have a more natural warmth and less harsh, symmetrical appearance than concrete pavers. Brick pavers are the most expensive pavers. They require more materials and more labor to use (paver space). “Pavers typically cost about a hundred and fifty to three hundred dollars per pallet. Concrete pavers are denser, generally available in a much wider range of sizes and shapes, and are more commonly used today. "(Purdy) Sand is the material that holds pavers in place. Use coarse sand and level it to a uniform depth of at least an inch, but no more than an inch and a half. If the project is large, workers must pave one-inch screened pipes and then pour the sand into the middle of the paper... a driveway used only for parking cars, the depth of the base would be much less than a commercial street (transportation research body). software available from the Interlocking Concrete Pavement Institute allows contractors and engineers to correct the depth and size of stones for the projects they are working on (How to Install Pavers) Brick laying is a much more practical approach to setting walkways or other projects. Customers need to choose the type of bricks they want to use for their projects and price matching between different companies. Standard bricks vary between thirty and forty-five cents per brick. Depending on where the customer lives and the type of brick they choose, prices could change quite a bit. Knowing the quantity of bricks you will need and maintaining control of them will reduce waste and project costs. (Mallory)